• 1803 Citations
  • 21 h-Index
20042019
If you made any changes in Pure these will be visible here soon.

Research Output 2004 2019

2019
Computational fluid dynamics
Texturing
Pressure distribution
Computer simulation
Pistons

Cutting tool wear progression index via signal element variance

Kasim, N. A., Nuawi, M. Z., A Ghani, J., Rizal, M., Ahmad, M. A. F. & Che Haron, C. H., 1 Mar 2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4596-4612 17 p.

Research output: Contribution to journalArticle

Cutting tools
Statistical methods
Wear of materials
Disintegration
Feature extraction

Prediction of cutting force for milling of Inconel 718 under cryogenic condition by response surface methodology

Halim, N. H. A., Che Haron, C. H., A Ghani, J. & Azhar, M. F., 1 Jan 2019, In : Journal of Mechanical Engineering. 16, 1, p. 1-16 16 p.

Research output: Contribution to journalArticle

Milling (machining)
Cryogenics
Cooling
Mechanical engineering
Analysis of variance (ANOVA)
Physical vapor deposition
X ray diffraction analysis
X ray photoelectron spectroscopy
arcs
photoelectron spectroscopy

The study on the properties of TiC x N 1−x coatings processed by cathodic arc physical vapour deposition

Siow, P. C., A Ghani, J., Rizal, M., Jaafar, T. R., Ghazali, M. J. & Che Haron, C. H., 2 Jan 2019, In : Tribology - Materials, Surfaces and Interfaces. 13, 1, p. 58-66 9 p.

Research output: Contribution to journalArticle

Physical vapor deposition
Coatings
Carbon
Carbon nitride
Carbides

Tool wear and chip morphology in high-speed milling of hardened Inconel 718 under dry and cryogenic CO2 conditions

Halim, N. H. A., Che Haron, C. H., A Ghani, J. & Azhar, M. F., 1 Jan 2019, In : Wear.

Research output: Contribution to journalArticle

Inconel (trademark)
Cryogenics
cryogenics
chips
high speed
2018
2 Citations (Scopus)

A brief review on friction reduction via dimple structure for piston engine

Rahman, H. A., A Ghani, J. & Wan Mahmood, W. M. F., 1 Jan 2018, In : World Review of Science, Technology and Sustainable Development. 14, 2-3, p. 147-164 18 p.

Research output: Contribution to journalReview article

Engine pistons
Friction
Pistons
Texturing
Textures

Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design

Suhaily, M., Che Haron, C. H., A Ghani, J., Afifah, M. A. & Nor Khairusshima, M. K., 30 Jan 2018, In : IOP Conference Series: Materials Science and Engineering. 290, 1, 012033.

Research output: Contribution to journalConference article

Kenaf fibers
Delamination
Design of experiments
Drilling
Laminates

Analysis of dimple structure fabricated using turning process and subsequent reduction in friction

A Ghani, J., Dali, M. N. A. M., Rahman, H. A., Che Haron, C. H., Wan Mahmood, W. M. F., Mohammad Rasani, M. R. & Nuawi, M. Z., 1 Jan 2018, (Accepted/In press) In : Wear.

Research output: Contribution to journalArticle

friction
Friction
friction reduction
tooling
Silicon alloys

A review on future implementation of cryogenic machining in manufacturing industry

Muhamad, S. S., A Ghani, J. & Che Haron, C. H., 1 Jan 2018, In : Progress in Industrial Ecology. 12, 3, p. 260-283 24 p.

Research output: Contribution to journalReview article

manufacturing industry
integrity
manufacturing
industry
natural disaster

Cutting tool wear prediction using novel pie-zofilm-based vibratory signal analysis (Z-rot)

Kasim, N. A., Nuawi, M. Z., A Ghani, J., Che Haron, C. H., Rizal, M. & Mohamed, M. G., 1 Jan 2018, 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling. International Institute of Acoustics and Vibration, IIAV, Vol. 5. p. 2868-2875 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

signal analysis
transition points
predictions
vibration
downtime

Design and construction of a strain gauge-based dynamometer for a 3-axis cutting force measurement in turning process

Rizal, M., A Ghani, J., Husni & Husaini, 1 Dec 2018, In : Journal of Mechanical Engineering and Sciences. 12, p. 4072-4087 16 p.

Research output: Contribution to journalArticle

Force measurement
Dynamometers
Strain gages
Machinability
Sensors

Fabrication of a dimple structure using a machining process on a metallic surface

A Ghani, J., Hassan, S., Bin Mohd Dali, M. N. A. & Che Haron, C. H., 1 Jan 2018, In : World Review of Science, Technology and Sustainable Development. 14, 2-3, p. 135-146 12 p.

Research output: Contribution to journalArticle

Machining
Fabrication
Milling (machining)
Electrochemistry
Electrolysis

Investigation of surface topology in ball nose end milling process of Inconel 718

Kasim, M. S., Hafiz, M. S. A., A Ghani, J., Che Haron, C. H., Izamshah, R., Sundi, S. A., Mohamed, S. B. & Othman, I. S., 1 Jan 2018, (Accepted/In press) In : Wear.

Research output: Contribution to journalArticle

Inconel (trademark)
balls
topology
Topology
surface roughness
1 Citation (Scopus)

Investigation of tangential force on ball nose rake face during high-speed milling of Inconel 718

Kasim, M. S., Che Haron, C. H., A Ghani, J., Izamshah, R., Akmal, M., Ali, M. A., Hadzley, M. & Salleh, M. S., 3 Jul 2018, In : Advances in Materials and Processing Technologies. 4, 3, p. 378-384 7 p.

Research output: Contribution to journalArticle

Cyclic loads
Cutting tools
Abrasion
Machining
Wear of materials
1 Citation (Scopus)

Machinability Study on Milling Kenaf Fiber Reinforced Plastic Composite Materials using Design of Experiments

Azmi, H., Che Haron, C. H., A Ghani, J., Suhaily, M. & Yuzairi, A. R., 16 Apr 2018, In : IOP Conference Series: Materials Science and Engineering. 344, 1, 012027.

Research output: Contribution to journalConference article

Kenaf fibers
Fiber reinforced plastics
Machinability
Milling (machining)
Design of experiments

Machining-induced microstructure of Inconel 718 in cryogenic environment

Halim, N. H. A., Che Haron, C. H., A Ghani, J. & Azhar, M. F., 1 Jan 2018, In : Progress in Industrial Ecology. 12, 3, p. 234-246 13 p.

Research output: Contribution to journalArticle

microstructure
plastic deformation
surface roughness
sliding
roughness

Overview and case study of cryogenic cooling in machining of nickel based alloy

Badroush, N., Che Haron, C. H., A Ghani, J., Azhar, M. F. & Abdul Halim, N. H., 1 Jan 2018, In : Journal of Mechanical Engineering. 5, Specialissue5, p. 187-204 18 p.

Research output: Contribution to journalArticle

Cryogenics
Machining
Nickel
Cooling
Wear of materials

Pembandingan kesan faktor pelekangan (Fd) ke atas bahan komposit plastik bertetulang ekaarah dan bertenun semasa proses pemesinan kisar

Azmi, H., Che Haron, C. H., A Ghani, J. & Suhaily, M., 1 Apr 2018, In : Sains Malaysiana. 47, 4, p. 829-838 10 p.

Research output: Contribution to journalArticle

Kenaf fibers
Fiber reinforced plastics
Delamination
Composite materials
Slotting

Performance of coated carbide tools when turning Inconel alloy 718 under cryogenic condition using RSM

Badroush, N., Che Haron, C. H., A Ghani, J., Azhar, M. F. & Abdul Halim, N. H., 15 Feb 2018, In : Journal of Mechanical Engineering. 5, Specialissue3, p. 73-87 15 p.

Research output: Contribution to journalArticle

Carbide tools
Cryogenics
Carbide cutting tools
Physical vapor deposition
Analysis of variance (ANOVA)

Performance of CVD coated carbide tool by optimizing machining parameters during turning titanium alloy Ti-6AL-4V eli in flooded condition

Asiyah, M. S., Sulaiman, M. A., Shahmi, R., Zuraimi, R., Mohamad, E., Che Haron, C. H. & A Ghani, J., 1 Jan 2018, In : Journal of Advanced Manufacturing Technology. 12, 1 Special Issue 2, p. 401-412 12 p.

Research output: Contribution to journalArticle

Carbide tools
Titanium Alloy
Titanium alloys
Machining
Chemical vapor deposition

Study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills

Suhaily, M., Che Haron, C. H., A Ghani, J., Azmi, H., Afifah, M. A. & Khairusshima, M. K. N., 19 Apr 2018, 2018 6th International Conference on Nano and Materials Science, ICNMS 2018. American Institute of Physics Inc., Vol. 1957. 0500041

Research output: Chapter in Book/Report/Conference proceedingConference contribution

drilling
carbides
composite materials
fibers
drill bits
2 Citations (Scopus)

The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel

Natasha, A. R., A Ghani, J., Che Haron, C. H. & Syarif, J., 30 Jan 2018, In : IOP Conference Series: Materials Science and Engineering. 290, 1, 012017.

Research output: Contribution to journalConference article

Steel
Cutting tools
Machining
Surface roughness
Wear of materials

Tool wear monitoring using macro fibre composite as a vibration sensor via I-kaz™ statistical signal analysis

Ahmad, M. A. F., Nuawi, M. Z., A Ghani, J., Abdullah, S. & Kasim, A. N., 1 Jun 2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 11, p. 3607-3616 10 p.

Research output: Contribution to journalArticle

Notch filters
Signal analysis
Macros
Wear of materials
Fibers
2017

Analysis of face milling performance on Inconel 718 using FEM and historical data of RSM

Chan, C. H., Kasim, M. S., Izamshah, R., Bakar, H. A., Sundi, S. A., Zakaria, K. A., Che Haron, C. H., A Ghani, J. & Hafiz, M. S. A., 1 Dec 2017, In : IOP Conference Series: Materials Science and Engineering. 270, 1, 012038.

Research output: Contribution to journalArticle

Finite element method
Analysis of variance (ANOVA)
Temperature
Experiments
1 Citation (Scopus)
Sensor data fusion
Dynamometers
Condition monitoring
Machining
Transducers

A review of the milling process to fabricate a dimple structure

Hassan, S., A Ghani, J., Che Haron, C. H., Dali, M. N. A. M. & Rizal, M., 2017, In : Journal of Mechanical Engineering. Special Issue 1, p. 175-192 18 p.

Research output: Contribution to journalArticle

Fabrication
Machining
Textures
Milling (machining)
Electrochemistry
Kenaf fibers
Fiber reinforced plastics
Delamination
Taguchi methods
Reinforced plastics
2 Citations (Scopus)

Comparison between Dynamic and Non-Dynamic Cutting Tool Option in FEM Simulation for Producing Dimple Structure

Dali, M. N. A. M., A Ghani, J. & Che Haron, C. H., 2017, In : Procedia CIRP. 58, p. 613-616 4 p.

Research output: Contribution to journalArticle

Cutting tools
Finite element method
Machining
Fabrication
Temperature
7 Citations (Scopus)

Cutting tool wear classification and detection using multi-sensor signals and Mahalanobis-Taguchi System

Rizal, M., A Ghani, J., Nuawi, M. Z. & Che Haron, C. H., 15 Apr 2017, In : Wear. 376-377, p. 1759-1765 7 p.

Research output: Contribution to journalArticle

Cutting tools
Wear of materials
sensors
Sensors
machining
1 Citation (Scopus)

Development of dynamic assisted tooling using TRIZ approach for dimple structure fabrication in milling process

Hassan, S. B., A Ghani, J., Che Haron, C. H. & Dali, M. N. A. B. M., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 1, p. 23-32 10 p.

Research output: Contribution to journalArticle

Fabrication
Cost reduction
Costs
1 Citation (Scopus)

Effect of Cutting Parameters on Surface Roughness in End Milling of AlSi/AlN Metal Matrix Composite

Tomadi, S. H., A Ghani, J., Che Haron, C. H., Ayu, H. M. & Daud, R., 2017, In : Procedia Engineering. 184, p. 58-69 12 p.

Research output: Contribution to journalArticle

Milling (machining)
Surface roughness
Composite materials
Metals
Carbides
1 Citation (Scopus)

Electroless quaternary ni-cu-co-p alloy deposition mechanism in acidic bath using cyclic voltammetry measurement

Azran, M. N., Khaizaki, M., Alif, M., Zaimi, M., ‘Azam, M. A., Kasim, M. S., Aizi, M. S. A., Anand, T. J. S., Che Haron, C. H. & A Ghani, J., 2017, In : Jurnal Teknologi. 79, 5-2, p. 7-13 7 p.

Research output: Contribution to journalArticle

Cyclic voltammetry
Nickel alloys
Substrates
Oxidation
Deposition rates
1 Citation (Scopus)

Evaluation of thrust force in drilling of woven kenaf fiber reinforced epoxy composite laminates

Mokhtar, S., Che Haron, C. H., A Ghani, J. & Harun, A., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 1, p. 148-168 21 p.

Research output: Contribution to journalArticle

Kenaf fibers
Laminates
Drilling
Composite materials
Carbides
2 Citations (Scopus)

Fabrication of dimple structured surface of A390 Al-Si alloy using turning process

Dali, M. N. A. M., A Ghani, J., Che Haron, C. H. & Hassan, S., 2017, In : Industrial Lubrication and Tribology. 69, 3, p. 348-354 7 p.

Research output: Contribution to journalArticle

Silicon alloys
Aluminum alloys
Machining
Fabrication
Signal to noise ratio

Influence of grinding parameters on surface finish of Inconel 718

Yaakob, N. A., Ganesan, H. N., Harun, N. H., Abdullah, R. I. R., Kasim, M. S., A Ghani, J. & Che Haron, C. H., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 2, p. 199-209 11 p.

Research output: Contribution to journalArticle

Analysis of variance (ANOVA)
Turbomachine blades
Turbines
Mechanical properties
2 Citations (Scopus)
Injection molding
Zirconia
Alumina
Sintering
Fracture toughness

Properties of jatropha hybrid seed oil and its suitability as biodiesel feedstock

Aminul Islam, A. K. M., Yaakob, Z., Anuar, N., Primandari, S. R. P. & A Ghani, J., 20 Sep 2017, (Accepted/In press) In : Energy Sources, Part A: Recovery, Utilization and Environmental Effects. p. 1-11 11 p.

Research output: Contribution to journalArticle

Oilseeds
Biodiesel
Feedstocks
Fatty acids
Density (specific gravity)

Tensile strength analysis of high density polyethylene for injection moulded parts

Zuraimi, R., Sulaiman, M. A., Mohamad, E. & A Ghani, J., 2017, In : Journal of Advanced Manufacturing Technology. 11, 1 Special Issue, p. 151-164 14 p.

Research output: Contribution to journalArticle

Tensile Strength
High density polyethylenes
Injection
Tensile strength
Melting

The correlation between tool wear and vibration signals from piezoelectric in end milling of AISI P20+NI

Md Tahir, N. H., Rizal, M., Mansor, W. N. W., A Ghani, J., Nuawi, M. Z. & Che Haron, C. H., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 2, p. 49-62 14 p.

Research output: Contribution to journalArticle

Wear of materials
Carbide cutting tools
Extrusion dies
Milling (machining)
Dynamometers
16 Citations (Scopus)

Tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed

Musfirah, A. H., A Ghani, J. & Che Haron, C. H., 15 Apr 2017, In : Wear. 376-377, p. 125-133 9 p.

Research output: Contribution to journalArticle

Inconel (trademark)
coolants
Coolants
Cryogenics
integrity

Tool wear condition monitoring using slip ring and accelerometer system in milling AISI P20 tool steel

Mansor, W. N. W., Tahir, N. H. M., A Ghani, J., Che Haron, C. H., Nuawi, M. Z. & Rizal, M., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 2, p. 63-72 10 p.

Research output: Contribution to journalArticle

Tool steel
Condition monitoring
Accelerometers
Wear of materials
Cutting tools
1 Citation (Scopus)

TRIZ approach for designing a new assisted tooling for dimple structure fabrication

Dali, M. N. A. B. M., A Ghani, J., Che Haron, C. H. & Rizal, M., 2017, In : Journal of Mechanical Engineering. Special Issue 1, p. 79-90 12 p.

Research output: Contribution to journalArticle

Fabrication
Structural design
Costs
DC motors
Cams

Value prediction of materials mechanical properties using I-kaz analysis method during impact test: Experimental study

Karim, Z., Said, A. Y. M., Nuawi, M. Z., A Ghani, J. & Bahari, A. R., 1 Jan 2017, In : International Journal of Applied Engineering Research. 12, 24, p. 14608-14619 12 p.

Research output: Contribution to journalArticle

Mechanical properties
Compressive strength
Vibrations (mechanical)
Acoustic waves
Notch filters
2016

A case study on manual handling at an electronic component manufacturing company

Md Deros, B., Daruis, D. D. I., A Ghani, J., Salleh, C., Wazir, R. M., Yasim, M. K., Hassan, N. H., Wazir, M. F. M., Saidin, M. S., Noridan, W. N. A. W. & Saidi, M. S., 2016, In : Malaysian Journal of Public Health Medicine. 1, Specialissue1, p. 1-6 6 p.

Research output: Contribution to journalArticle

Steel
Human Engineering
Observation
Handling (Psychology)
Posture

A triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool

Rizal, M., A Ghani, J., Nuawi, M. Z. & Che Haron, C. H., 21 Mar 2016, Proceedings of the International Conference on Sensing Technology, ICST. IEEE Computer Society, Vol. 2016-March. p. 289-294 6 p. 7438409

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Force measurement
Transducers
Sensors
Milling (machining)
Telemetering
3 Citations (Scopus)

Cost evaluation on performance of a PVD coated cutting tool during end-milling of Inconel 718 under MQL conditions

Kasim, M. S., Che Haron, C. H., A Ghani, J., Hadi, M. A., Izamshah, R., Anand, T. J. S. & Mohamed, S. B., 3 Jul 2016, In : Transactions of the Institute of Metal Finishing. 94, 4, p. 175-181 7 p.

Research output: Contribution to journalArticle

Inconel (trademark)
Physical vapor deposition
Cutting tools
lubrication
Lubrication
1 Citation (Scopus)

Effect of carbon content in TiCxN1−x coating on the adhesivity of carbide cutting tools and machining performance

Siow, P. C., A Ghani, J., Che Haron, C. H., Ghazali, M. J. & Ria Jaafar, T., 3 Feb 2016, (Accepted/In press) In : Journal of Materials Research. p. 1-5 5 p.

Research output: Contribution to journalArticle

Carbide cutting tools
machining
carbides
Machining
Carbon
5 Citations (Scopus)

Effect of cutting speed on the carbide cutting tool in milling Inconel 718 alloy

Abdul Hadi, M., A Ghani, J., Che Haron, C. H. & Kasim, M. S., 14 Jul 2016, In : Journal of Materials Research. 31, 13, p. 1885-1892 8 p.

Research output: Contribution to journalArticle

Carbide cutting tools
Inconel (trademark)
Milling (machining)
carbides
machining
Malaysia
engineering
examination
student
semester