• 1204 Citations
  • 17 h-Index
19982019
If you made any changes in Pure these will be visible here soon.

Research Output 1998 2019

  • 1204 Citations
  • 17 h-Index
  • 139 Article
  • 47 Conference contribution
  • 6 Review article
  • 2 Conference article
Filter
Conference contribution
2017
1 Citation (Scopus)

Diversification studies on samarium strontium cobaltite regarding thermal & structural properties as based composite cathode of SOFC

Mohammad, S. F., Ahmad, S., Abdul Rahman, H. & Muchtar, A., 2017, Current Material Research Using X-Rays and Related Techniques II. Trans Tech Publications Ltd, Vol. 888 MSF. p. 162-166 5 p. (Materials Science Forum; vol. 888 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Strontium
samarium
Solid oxide fuel cells (SOFC)
strontium
2015
1 Citation (Scopus)

Review on anode material development in solid oxide fuel cells

Mahmud, L. S., Muchtar, A. & Somalu, M. R., 15 May 2015, International Conference on Mathematics, Engineering and Industrial Applications, ICoMEIA 2014. American Institute of Physics Inc., Vol. 1660. 070095

Research output: Chapter in Book/Report/Conference proceedingConference contribution

solid oxide fuel cells
anodes
cell anodes
electrochemical oxidation
materials science
1 Citation (Scopus)

Types of Failures in Porcelain-Fused-to-Metal Dental Restoration

Aboras, M. M., Muchtar, A., Azhari, C. H. & Yahaya, N., 2015, IFMBE Proceedings. Springer Verlag, Vol. 45. p. 345-348 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dental Porcelain
Porcelain
Restoration
Metals
Defects

Understanding the rheology of screen-printing inks for the fabrication of SOFC thick films

Somalu, M. R., Muchtar, A. & Brandon, N. P., 2015, ECS Transactions. 1 ed. Electrochemical Society Inc., Vol. 68. p. 1323-1331 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Screen printing
Solid oxide fuel cells (SOFC)
Rheology
Thick films
Ink
2014
1 Citation (Scopus)

A review: Effect of sintering method on the decomposition of hydroxyapatite and density of hydroxyapatite zirconia composites

Leong, C. H., Muchtar, A., Tan, C. Y. & Razali, M., 2014, Applied Mechanics and Materials. Vol. 465-466. p. 843-846 4 p. (Applied Mechanics and Materials; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydroxyapatite
Zirconia
Sintering
Decomposition
Composite materials

A review of the low-temperature degradation of dental zirconia

Aboras, M. M., Theng, K. Y., Muchtar, A., Azhari, C. H. & Yahaya, N., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 606. p. 85-88 4 p. (Applied Mechanics and Materials; vol. 606).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Degradation
Restoration
Temperature
Dental materials
2 Citations (Scopus)

Comparison between slip casting and cold isostatic pressing for the fabrication of nanostructured zirconia

Amat, N. F., Muchtar, A., Yahaya, N., Ghazali, M. J. & Hao, C. C., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 896. p. 335-338 4 p. (Advanced Materials Research; vol. 896).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Casting
Fabrication
Consolidation
Vickers hardness
16 Citations (Scopus)

Durability and stability of LSCF composite cathode for intermediate-low temperature of solid oxide fuel cell (IT-LT SOFC): Short review

Agun, L., Abd. Rahman, H., Ahmad, S. & Muchtar, A., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 893. p. 732-737 6 p. (Advanced Materials Research; vol. 893).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Durability
Cathodes
Composite materials
Temperature
1 Citation (Scopus)

Effects of calcination factors on the composite cathode powder LSCF-SDC carbonate by using dry milling

Bakar, M. S. A., Kamaruddin, M. F., Ahmad, S., Rahman, H. A., Basri, H. & Muchtar, A., 2014, Applied Mechanics and Materials. Vol. 465-466. p. 167-171 5 p. (Applied Mechanics and Materials; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calcination
Carbonates
Cathodes
Powders
Composite materials

Effects of milling techniques and calcinations temperature on the composite cathode powder LSCF-SDC carbonate

Bakar, M. S. A., Ahmad, S., Rahman, H. A., Tasrim, M. A. F. M., Basri, H. & Muchtar, A., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 893. p. 325-328 4 p. (Advanced Materials Research; vol. 893).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calcination
Carbonates
Cathodes
Powders
Composite materials
1 Citation (Scopus)

Influence of calcination on the properties of La0.6Sr0.4Co0.2Fe0.8O3-δ-samarium doped ceria carbonate

Rahman, H. A., Muchtar, A., Muhamad, N. & Abdullah, H., 2014, Applied Mechanics and Materials. Vol. 465-466. p. 949-953 5 p. (Applied Mechanics and Materials; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Lanthanum
Strontium
Calcination

Influence of sintering temperature on the translucency of sintered zirconia by cold isostatic pressing

Hao, C. C., Muchtar, A., Amat, N. F., Ghazali, M. J. & Yahaya, N., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 896. p. 591-595 5 p. (Advanced Materials Research; vol. 896).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Sintering
Temperature
Hardness
Electron microscopes
1 Citation (Scopus)

Properties and survival rate of all ceramics dental crown: A review

Theng, K. Y., Muchtar, A., Mohamed, A., Yahaya, N. & Ghazali, M. J., 2014, Applied Mechanics and Materials. Vol. 465-466. p. 857-861 5 p. (Applied Mechanics and Materials; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Restoration
Bioceramics
Porcelain
Biological systems
Metals

Type of failure of zirconia-based ceramics in dental laboratory in Misurata, Libya

Aboras, M. M., Muchtar, A., Azhari, C. H. & Yahaya, N., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 575. p. 22-25 4 p. (Applied Mechanics and Materials; vol. 575).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Restoration
Defects
Dental materials
Veneers
2013
1 Citation (Scopus)

Decomposition of hydroxyapatite in hydroxyapatite/zirconia composites for dental applications

Leong, C. H., Lim, K. F., Muchtar, A. & Yahaya, N., 2013, Advanced Materials Research. Vol. 750-752. p. 1664-1668 5 p. (Advanced Materials Research; vol. 750-752).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydroxyapatite
Zirconia
Decomposition
Composite materials
Mechanical properties

Effect of dispersant agent amount in colloidal processing of zirconia dental ceramic

Amat, N. F., Muchtar, A., Yahaya, N. & Ghazali, M. J., 2013, Advanced Materials Research. Vol. 622. p. 215-219 5 p. (Advanced Materials Research; vol. 622).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Processing
Viscometers
Polyelectrolytes
Rheology

Effect of sintering temperature on the mechanical properties of nanostructured zirconia fabricated via colloidal processing

Amat, N. F., Muchtar, A., Yahaya, N. & Ghazali, M. J., 2013, Advanced Materials Research. Vol. 686. p. 44-48 5 p. (Advanced Materials Research; vol. 686).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Sintering
Hardness
Mechanical properties
Processing

Effect of the deposition time on LSCF-SDC carbonate thin film formation by the electrophoretic deposition method

Baharuddin, N. A., Muchtar, A., Sulong, A. B. & Abdullah, H., 2013, Advanced Materials Research. Vol. 616-618. p. 1813-1818 6 p. (Advanced Materials Research; vol. 616-618).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Carbonates
Thin films
Electric potential
5 Citations (Scopus)

Effects of injection temperature and pressure on green part density for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 622. p. 429-432 4 p. (Advanced Materials Research; vol. 622).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Paraffin waxes
Powders
Stearic acid
High density polyethylenes
5 Citations (Scopus)

Fabrication methods for planar solid oxide fuel cells: A review

Baharuddin, N. A., Muchtar, A., Sulong, A. B. & Abdullah, H., 2013, Advanced Materials Research. Vol. 662. p. 396-401 6 p. (Advanced Materials Research; vol. 662).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Fabrication
Fuel cells
Screen printing
Fossil fuels
1 Citation (Scopus)

Optimum powder loading of feedstock based on an alumina-zirconia powder for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 686. p. 275-279 5 p. (Advanced Materials Research; vol. 686).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Zirconia
Feedstocks
Alumina
Powders

Preparation of HA-Zirconia nanocomposite for dental applications

Lim, K. F., Muchtar, A., Mustaffa, R. & Tan, C. Y., 2013, Advanced Materials Research. Vol. 662. p. 35-39 5 p. (Advanced Materials Research; vol. 662).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydroxyapatite
Zirconia
Nanocomposites
Yttria stabilized zirconia
Ball milling

Rheological properties of zirconia toughened alumina powder for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 626. p. 294-297 4 p. (Advanced Materials Research; vol. 626).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Zirconia
Feedstocks
Alumina
Powders

Sintering of HA/zirconia composite for biomedical and dental applications: A review

Lim, K. F., Muchtar, A., Mustaffa, R. & Tan, C. Y., 2013, Advanced Materials Research. Vol. 686. p. 290-295 6 p. (Advanced Materials Research; vol. 686).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydroxyapatite
Zirconia
Sintering
Composite materials
Hot isostatic pressing
5 Citations (Scopus)

Understanding the relationship between ink rheology and film properties for screen-printed nickel/scandia-stabilized-zirconia anodes

Somalu, M. R., Muchtar, A., Baboli, M. G., Yufit, V., Shapiro, I. P., Xiao, P. & Brandon, N. P., 2013, ECS Transactions. 1 ed. Electrochemical Society Inc., Vol. 57. p. 1321-1330 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Scandium
Rheology
Ink
Zirconia
Anodes
2012
5 Citations (Scopus)

The effect of milling speed and calcination temperature towards composite cathode LSCF-SDC carbonate

Ahmad, S., Bakar, M. S. A., Muchtar, A., Muhamad, N. & Rahman, H. A., 2012, Advanced Materials Research. Vol. 576. p. 220-223 4 p. (Advanced Materials Research; vol. 576).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Calcination
Carbonates
Cathodes
2011
3 Citations (Scopus)

A review on preparation of SDC-carbonate as composite electrolyte material for intermediate temperature Solid Oxide Fuel Cells (IT-SOFC)

Muhammed Ali, S. A., Muchtar, A., Muhamad, N. & Sulong, A. B., 2011, 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011. p. 394-399 6 p. 6041504

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Solid oxide fuel cells (SOFC)
Carbonates
Electrolytes
1 Citation (Scopus)

Contribution to the understanding of cultural dynamics in co-operation between Malaysia and Germany

Redzuan Lee, M. N., Muchtar, A., Sulehan, J., Mastor, K. A. . J., Hunger, A. & Abdullah, S., 2011, Procedia - Social and Behavioral Sciences. Vol. 18. p. 204-212 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Malaysia
Germany
Students
student
resilience
6 Citations (Scopus)

Effects of Al2O3-13% TiO2 coating particle size on commercial mild steel via plasma spray method

Hassanuddin, N., Ghazali, M. J., Muchtar, A., Isa, M. C. & Daud, A. R., 2011, Key Engineering Materials. Vol. 462-463. p. 645-650 6 p. (Key Engineering Materials; vol. 462-463).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powders
Carbon steel
Particle size
Plasmas
Coatings
7 Citations (Scopus)

Fabrication and characterisation of La0.6Sr0.4Co 0.2Fe0.8O3-δ-SDC cathode composite

Rahman, H. A., Muchtar, A., Muhamad, N. & Abdullah, H., 2011, Key Engineering Materials. Vol. 471-472. p. 268-273 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Powders
Cathodes
Fabrication
8 Citations (Scopus)

Fabrication of porous LSCF-SDC carbonates composite cathode for solid oxide fuel cell (SOFC) applications

Jarot, R., Muchtar, A., Wan Daud, W. R., Muhamad, N. & Edy Herianto, M., 2011, Key Engineering Materials. Vol. 471-472. p. 179-184 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbonates
Solid oxide fuel cells (SOFC)
Cathodes
Powders
Fabrication

Finite element analysis of indentation cracks for brittle materials under static loading

Souiyah, M., Muchtar, A. & Mohd Ihsan, A. K. A., 2011, Key Engineering Materials. Vol. 462-463. p. 160-165 6 p. (Key Engineering Materials; vol. 462-463).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Brittleness
Indentation
Cracks
Finite element method
Trajectories
1 Citation (Scopus)

Influence of processing parameters on electrophoretically deposited La 0.6Sr0.4Co0.2Fe0.8O 3-δ films

Rahman, H. A., Muchtar, A., Muhamad, N. & Abdullah, H., 2011, Key Engineering Materials. Vol. 462-463. p. 148-153 6 p. (Key Engineering Materials; vol. 462-463).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lanthanum
Strontium
Ferrite
Processing
Deionized water

Internationalisation and its implications for intercultural maturity among academic staff: A case study

Mustafa, J., Sulehan, J., Pawanteh, L., Abdullah, S., Basri, H., Muchtar, A., Mastor, K. A. . J., Abd Ghani, Z. & Axel, H., 2011, Procedia - Social and Behavioral Sciences. Vol. 18. p. 575-584 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Personhood
internationalization
maturity
staff
Malaysia
1 Citation (Scopus)

Microstructure characterisation of Ag2O3-Bi 2O3 composite cathodes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)

Dedikarni, Muchtar, A., Muhamad, N. & Wan Daud, W. R., 2011, Key Engineering Materials. Vol. 471-472. p. 97-102 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Cathodes
Microstructure
Composite materials
Temperature

On the crack propagation trajectory of central cracked plates under mixed mode loading conditions

Souiyah, M., Muchtar, A. & Mohd Ihsan, A. K. A., 2011, Key Engineering Materials. Vol. 462-463. p. 154-159 6 p. (Key Engineering Materials; vol. 462-463).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack propagation
Trajectories
Stress intensity factors
Extrapolation
Fracture mechanics
1 Citation (Scopus)

Pattern of changes in personality traits and self-esteem among UKM-UDE Double degree students

Muchtar, A., Redzuan Lee, M. N., Mastor, K. A. . J., Abdullah, S. & Hunger, A., 2011, 2011 IEEE Global Engineering Education Conference, EDUCON 2011. p. 786-791 6 p. 5773229

Research output: Chapter in Book/Report/Conference proceedingConference contribution

personality traits
self-esteem
Students
student
personality development
6 Citations (Scopus)

Porous NiO-SDC carbonates composite anode for LT-SOFC applications produced by pressureless sintering

Jarot, R., Muchtar, A., Wan Daud, W. R., Muhamad, N. & Herianto, E., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 488-493 6 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Carbonates
Anodes
Sintering
Powders
1 Citation (Scopus)

Preparation and evaluation of Ba xSr (x-1)Co yFe (y-1)O 3-δ nanomaterial for SOFC cathode by oxalate co-precipitation (x=0.2, y=0.8)

Ahmadrezaei, M., Muchtar, A., Muhamad, N. & Tan, C. Y., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 1177-1181 5 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Coprecipitation
Solid oxide fuel cells (SOFC)
Nanostructured materials
Perovskite
Cathodes
4 Citations (Scopus)

Simultaneous optimization for multiple responses on the compression moulding parameters of composite graphite - Polypropylene using taguchi method

Selamat, M. Z., Sahari, J., Muhamad, N. & Muchtar, A., 2011, Key Engineering Materials. Vol. 471-472. p. 361-366 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
Compression molding
Graphite
Polypropylenes
Bending strength
2 Citations (Scopus)

Taguchi method for the determination of optimised sintering parameters of titanium alloy foams

Ahmad, S., Muhamad, N., Muchtar, A., Sahari, J., Jamaludin, K. R., Ibrahim, M. H. I. & Mohamad Nor, N. H., 2011, Advanced Materials Research. Vol. 264-265. p. 1731-1736 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
Titanium alloys
Foams
Sintering
Heating rate
2010

Characterisations of Al2O3-13% Wt TiO2 deposition on mild steel via plasma spray method

Yusoff, N. H., Ghazali, M. J., Isa, M. C., Daud, A. R., Muchtar, A. & Forghani, S., 2010, AIP Conference Proceedings. Vol. 1315. p. 1565-1569 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sprayers
steels
porosity
aluminum oxides
titanium
6 Citations (Scopus)

Electrophoretic deposition of La0.6Sr0.4Co 0.2Fe0.8O3-δ cathode film on stainless steel substrates

Rahman, H. A., Muchtar, A., Muhamad, N. & Abdullah, H., 2010, Advanced Materials Research. Vol. 139-141. p. 145-148 4 p. (Advanced Materials Research; vol. 139-141).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cathodes
Stainless steel
Substrates
Deionized water
Electric potential
11 Citations (Scopus)

Fabrication of dense composite ceramic electrolyte SDC-(Li/Na) 2CO3

Raharjo, J., Muchtar, A., Wan Daud, W. R., Muhamad, N. & Herianto, E., 2010, Key Engineering Materials. Vol. 447 448. p. 666-670 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbonates
Electrolytes
Samarium
Cerium
Fabrication
5 Citations (Scopus)

Investigation on students' personality development of UKM-UDE double degree programme

Muchtar, A., Redzuan Lee, M. N., Mastor, K. A. . J., Sulehan, J., Abdullah, S., Jusdi, M. & Hunger, A., 2010, 2010 2nd International Congress on Engineering Education: Transforming Engineering Education to Produce Quality Engineers, ICEED2010. p. 73-78 6 p. 5940767

Research output: Chapter in Book/Report/Conference proceedingConference contribution

personality development
Malaysia
Students
engineering
student
3 Citations (Scopus)

Optical and structural properties of ZnS thin films grown by CBD technique

Abdullah, H., Saadah, N. H., Shaari, S. & Muchtar, A., 2010, Advanced Materials Research. Vol. 139-141. p. 149-152 4 p. (Advanced Materials Research; vol. 139-141).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural properties
Optical properties
Thin films
Optical glass
Zinc sulfide
8 Citations (Scopus)

Sintering effects on LSCF cathodes for intermediate temperature solid oxide fuel cells (IT-SOFCs)

Muchtar, A., Hamid, N. A., Muhamad, N. & Wan Daud, W. R., 2010, Advanced Materials Research. Vol. 139-141. p. 141-144 4 p. (Advanced Materials Research; vol. 139-141).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Cathodes
Sintering
Temperature
Density (specific gravity)