Research Output 2012 2018

  • 62 Citations
  • 4 h-Index
  • 15 Article
  • 9 Conference contribution
  • 1 Chapter
2018
2 Citations (Scopus)

Effect of sintering temperature on the aging resistance and mechanical properties of monolithic zirconia

Amat, N. F., Muchtar, A., Amril, M. S., Ghazali, M. J. & Yahaya, N., 1 Jan 2018, (Accepted/In press) In : Journal of Materials Research and Technology.

Research output: Contribution to journalArticle

Zirconia
Sintering
Aging of materials
Mechanical properties
Temperature
1 Citation (Scopus)
Yttria stabilized zirconia
Zirconia
Mechanical properties
Processing
Polyethyleneimine

Influence of presintering parameters on the mechanical properties of presintered dental zirconia block

Amat, N. F., Raji, S. L., Muchtar, A., Amril, M. S., Ghazali, M. J. & Yahaya, N., 1 Jan 2018, In : International Journal of Integrated Engineering. 10, 5, p. 68-73 6 p.

Research output: Contribution to journalArticle

Heating rate
Zirconia
Hardness
Mechanical properties
Sintering
4 Citations (Scopus)

Preparation of presintered zirconia blocks for dental restorations through colloidal dispersion and cold isostatic pressing

Amat, N. F., Muchtar, A., Amril, M. S., Ghazali, M. J. & Yahaya, N., 1 Jan 2018, (Accepted/In press) In : Ceramics International.

Research output: Contribution to journalArticle

Zirconia
Restoration
Ball milling
Suspensions
Particle size

Restoring esthetic and function with prosthodontics

Ong, H. T., Yahaya, N. & Ahmad Tarib, N., 18 Jul 2018, Case Reports in Dentistry. Nova Science Publishers, Inc., p. 465-474 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Prosthodontics
Esthetics
Prostheses and Implants
Oral Hygiene
Therapeutics
2017
3 Citations (Scopus)

Evaluation of shear bond strength of a novel nano-zirconia and veneering ceramics

Daud, M. H. M., Yew, H. Z., Kamaruzaman @ Qamaruz Zaman, J., Yahaya, N. & Muchtar, A., 1 Jan 2017, In : Ceramics International. 43, 1, p. 1272-1277 6 p.

Research output: Contribution to journalArticle

Zirconia
Dental Porcelain
Porcelain
Metals
Analysis of variance (ANOVA)
1 Citation (Scopus)
Alveolar Process
Bone Regeneration
Macaca fascicularis
Bone Marrow Cells
Bone
3 Citations (Scopus)

The effect of chewing simulation on surface roughness of resin composite when opposed by zirconia ceramic and lithium disilicate ceramic

Ho, T. K., Satterthwaite, J. D. & Silikas, N., 1 Jan 2017, (Accepted/In press) In : Dental Materials.

Research output: Contribution to journalArticle

Mastication
Composite Resins
Ceramics
Zirconia
Lithium
2016
2 Citations (Scopus)

Influence of processing on mechanical properties of 3Y-TZP for dental applications

Aboras, M., Muchtar, A., Azhari, C. H., Yahaya, N. & Hao, C. C., 2016, In : Jurnal Teknologi. 78, 11-3, p. 7-12 6 p.

Research output: Contribution to journalArticle

Casting
Hardness
Consolidation
Mechanical properties
Microstructure
3 Citations (Scopus)

Shear bond strength of veneering ceramic to coping materials with different pre-surface treatments

Ahmad Tarib, N., Anuar, N. & Ahmad, M., 2016, In : Journal of Advanced Prosthodontics. 8, 5, p. 339-344 6 p.

Research output: Contribution to journalArticle

Shear Strength
Ceramics
Acids
Metals
Analysis of Variance
2015
2 Citations (Scopus)

Development of translucent zirconia for dental crown applications

Theng, K. Y., Muchtar, A., Yahaya, N. & Ghazali, M. J., 2015, In : Asian Journal of Scientific Research. 8, 3, p. 342-350 9 p.

Research output: Contribution to journalArticle

aluminum oxide
transmittance
ceramics
esthetics
hardness

Improvement of mechanical properties of Y-TZP via ceria addition and cold isostatic pressing method

Aboras, M., Muchtar, A., Azhari, C. H., Yahaya, N. & Hao, C. C., 2015, In : Jurnal Teknologi. 77, 6, p. 55-59 5 p.

Research output: Contribution to journalArticle

Cerium compounds
Mechanical properties
Zirconia
Casting
Hardness
1 Citation (Scopus)

Types of Failures in Porcelain-Fused-to-Metal Dental Restoration

Aboras, M. M., Muchtar, A., Azhari, C. H. & Yahaya, N., 2015, IFMBE Proceedings. Springer Verlag, Vol. 45. p. 345-348 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dental Porcelain
Porcelain
Restoration
Metals
Defects
2014
1 Citation (Scopus)

A review of the low-temperature degradation of dental zirconia

Aboras, M. M., Theng, K. Y., Muchtar, A., Azhari, C. H. & Yahaya, N., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 606. p. 85-88 4 p. (Applied Mechanics and Materials; vol. 606).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Degradation
Restoration
Temperature
Dental materials
2 Citations (Scopus)

Comparison between slip casting and cold isostatic pressing for the fabrication of nanostructured zirconia

Amat, N. F., Muchtar, A., Yahaya, N., Ghazali, M. J. & Hao, C. C., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 896. p. 335-338 4 p. (Advanced Materials Research; vol. 896).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Casting
Fabrication
Consolidation
Vickers hardness
2 Citations (Scopus)

Influence of sintering temperature on the translucency of sintered zirconia by cold isostatic pressing

Hao, C. C., Muchtar, A., Amat, N. F., Ghazali, M. J. & Yahaya, N., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 896. p. 591-595 5 p. (Advanced Materials Research; vol. 896).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Sintering
Temperature
Hardness
Electron microscopes
1 Citation (Scopus)

Properties and survival rate of all ceramics dental crown: A review

Theng, K. Y., Muchtar, A., Mohamed, A., Yahaya, N. & Ghazali, M. J., 2014, Applied Mechanics and Materials. Vol. 465-466. p. 857-861 5 p. (Applied Mechanics and Materials; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Restoration
Bioceramics
Porcelain
Biological systems
Metals
17 Citations (Scopus)

Suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing

Amat, N. F., Muchtar, A., Ghazali, M. J. & Yahaya, N., May 2014, In : Ceramics International. 40, 4, p. 5413-5419 7 p.

Research output: Contribution to journalArticle

Yttria stabilized zirconia
Suspensions
Sintering
Zirconia
Processing

Type of failure of zirconia-based ceramics in dental laboratory in Misurata, Libya

Aboras, M. M., Muchtar, A., Azhari, C. H. & Yahaya, N., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 575. p. 22-25 4 p. (Applied Mechanics and Materials; vol. 575).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Restoration
Defects
Dental materials
Veneers
2013
1 Citation (Scopus)

Decomposition of hydroxyapatite in hydroxyapatite/zirconia composites for dental applications

Leong, C. H., Lim, K. F., Muchtar, A. & Yahaya, N., 2013, Advanced Materials Research. Vol. 750-752. p. 1664-1668 5 p. (Advanced Materials Research; vol. 750-752).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydroxyapatite
Zirconia
Decomposition
Composite materials
Mechanical properties

Effect of dispersant agent amount in colloidal processing of zirconia dental ceramic

Amat, N. F., Muchtar, A., Yahaya, N. & Ghazali, M. J., 2013, Advanced Materials Research. Vol. 622. p. 215-219 5 p. (Advanced Materials Research; vol. 622).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Processing
Viscometers
Polyelectrolytes
Rheology

Effect of sintering temperature on the mechanical properties of nanostructured zirconia fabricated via colloidal processing

Amat, N. F., Muchtar, A., Yahaya, N. & Ghazali, M. J., 2013, Advanced Materials Research. Vol. 686. p. 44-48 5 p. (Advanced Materials Research; vol. 686).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zirconia
Sintering
Hardness
Mechanical properties
Processing
2012
5 Citations (Scopus)

A review of zirconia as a dental restorative material

Amat, N. F., Muchtar, A., Yahaya, N. & Ghazali, M. J., Nov 2012, In : Australian Journal of Basic and Applied Sciences. 6, 12, p. 9-13 5 p.

Research output: Contribution to journalArticle

Dental Materials
Ceramics
Tooth
Dentistry
Esthetics
2 Citations (Scopus)

Challenges in culturing Macaca fascicularis bone Marrow stem cells

Sharensharen Aini, S., Razali, M., Baharin, B., Ng, M. H., Shamsul, B. S., Kien Hui, C., Low, C. K., Abd Jabar, M. N., Nordin, R., Yahaya, N., Shariffah Shuriana, A. S., Idrus, R., Siar, C. & Ramli, R., Apr 2012, In : Sains Malaysiana. 41, 4, p. 419-422 4 p.

Research output: Contribution to journalArticle

Macaca fascicularis
Bone Marrow Cells
Stem Cells
Serum
Growth
9 Citations (Scopus)

Evaluation of splinting implant impression techniques: two dimensional analyses.

Ahmad Tarib, N., Seong, T. W., Chuen, K. M., Kun, M. S., Ahmad, M. & Kamarudin, K. H., Mar 2012, In : The European journal of prosthodontics and restorative dentistry. 20, 1, p. 35-39 5 p.

Research output: Contribution to journalArticle

Acrylic Resins
Analysis of Variance