Fuel Cell Institute (SELFUEL)

Research Output 2006 2019

7 Citations (Scopus)

Characterization of IT-SOFC non-symmetrical anode sintered through conventional furnace and microwave

Seyednezhad, M., Rajabi, A., Muchtar, A. & Somalu, M. R., 1 May 2015, In : Ceramics International. 41, 4, p. 5663-5669 7 p.

Research output: Contribution to journalArticle

Solid oxide fuel cells (SOFC)
Anodes
Furnaces
Sintering
Microwaves
22 Citations (Scopus)

Characterization of membrane biofouling and its effect on the performance of microbial fuel cell

Miskan, M., Ismail, M., Ghasemi, M., Md Jahim, J., Nordin, D. & Abu Bakar, M. H., 5 Jan 2016, In : International Journal of Hydrogen Energy. 41, 1, p. 543-552 10 p.

Research output: Contribution to journalArticle

Biofouling
Microbial fuel cells
fuel cells
membranes
Membranes

Characterization of tar formation during high temperature gasification of different chemical compositions in biomass

Zubair Yahaya, A., Somalu, M. R., Muchtar, A., Anwar Sulaiman, S. & Wan Daud, W. R., 2 Jul 2019, In : IOP Conference Series: Earth and Environmental Science. 268, 1, 012142.

Research output: Contribution to journalConference article

Open Access
tar
chemical composition
biomass
shell
gas chromatography
1 Citation (Scopus)

Characterization of ultraviolet-photocured acrylamide based polymer

Rozi, N., Abu Hanifah, S., Lee, Y. H. & Loh, K. S., 17 Nov 2016, 2016 UKM FST Postgraduate Colloquium: Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2016 Postgraduate Colloquium. American Institute of Physics Inc., Vol. 1784. 030017

Research output: Chapter in Book/Report/Conference proceedingConference contribution

membranes
polymers
copolymers
immobilization
swelling
10 Citations (Scopus)

Clean hydrogen production in a full biological microbial electrolysis cell

Jafary, T., Wan Daud, W. R., Ghasemi, M., Abu Bakar, M. H., Sedighi, M., Kim, B. H., Carmona-Martínez, A. A., Md Jahim, J. & Ismail, M., 1 Jan 2018, (Accepted/In press) In : International Journal of Hydrogen Energy.

Research output: Contribution to journalArticle

Regenerative fuel cells
hydrogen production
electrolysis
Hydrogen production
cells
55 Citations (Scopus)
Proton exchange membrane fuel cells (PEMFC)
stainless steels
Stainless steel
titanium
Titanium
2 Citations (Scopus)

Cobalt-doped carbon xerogel with different initial pH values toward oxygen reduction

Fitri, A., Loh, K. S., Puspasari, I. & Mohamad, A. B., 4 Dec 2017, Advanced Materials for Sustainability and Growth: Proceedings of the 3rd Advanced Materials Conference 2016, 3rd AMC 2016. American Institute of Physics Inc., Vol. 1901. 020027

Research output: Chapter in Book/Report/Conference proceedingConference contribution

xerogels
cobalt
carbon
oxygen
catalytic activity

Cobalt oxide as photocatalyst for water splitting: Temperature-dependent phase structures

Moridon, S. N. F., Salehmin, M. I., Mohamed, M. A., Khuzaimah, A., Effery Minggu, L. & Kassim, M., 4 Oct 2019, In : International Journal of Hydrogen Energy. 44, 47, p. 25495-25504 10 p.

Research output: Contribution to journalArticle

water splitting
cobalt oxides
Phase structure
Photocatalysts
Cobalt

Comparative Study on Water Uptake and Ionic Transport Properties of Pre- and Post Sulfonated Chitosan/PVA polymer Exchange Membrane

Wong, C. Y., Wong, W. Y., Loh, K. S., Wan Daud, W. R., Lim, K. L., Loh, K. S., Walvekar, R. & Khalid, M., 24 Dec 2018, In : IOP Conference Series: Materials Science and Engineering. 458, 1, 012017.

Research output: Contribution to journalConference article

Chitosan
Sulfonation
Transport properties
Polymers
Membranes
13 Citations (Scopus)
Microbial fuel cells
Ceramic membranes
Cell membranes
Separators
Cations
19 Citations (Scopus)

Concurrent growth, structural and photocatalytic properties of hybridized C, N co-doped TiO2 mixed phase over g-C3N4 nanostructured

Mohamed, M. A., Jaafar, J., M. Zain, M. F., Effery Minggu, L., Kassim, M., Salehmin, M. N. I., Rosmi, M. S., W. Salleh, W. N. & Othman, M. H. D., 1 Jan 2018, In : Scripta Materialia. 142, p. 143-147 5 p.

Research output: Contribution to journalArticle

Photocatalysts
roasting
heterojunctions
Calcination
Heterojunctions
39 Citations (Scopus)

Constructing bio-templated 3D porous microtubular C-doped g-C3N4 with tunable band structure and enhanced charge carrier separation

Mohamed, M. A., M. Zain, M. F., Effery Minggu, L., Kassim, M., Saidina Amin, N. A., W. Salleh, W. N., Salehmin, M. N. I., Md Nasir, M. F. & Mohd Hir, Z. A., 15 Nov 2018, In : Applied Catalysis B: Environmental. 236, p. 265-279 15 p.

Research output: Contribution to journalArticle

Charge carriers
Impregnation
Band structure
urea
Urea
76 Citations (Scopus)

Copper-phthalocyanine and nickel nanoparticles as novel cathode catalysts in microbial fuel cells

Ghasemi, M., Wan Daud, W. R., Rahimnejad, M., Rezayi, M., Fatemi, A., Jafari, Y., Somalu, M. R. & Manzour, A., 26 Jul 2013, In : International Journal of Hydrogen Energy. 38, 22, p. 9533-9540 8 p.

Research output: Contribution to journalArticle

Microbial fuel cells
fuel cells
Cathodes
cathodes
Nickel
1 Citation (Scopus)

Corrosion Inhibition of Cold-rolled Low Carbon Steel with Pulse Fiber Laser Ablation in Water

Chan, S. N., Wong, W. Y., Walvekar, R., Kadhum, A. A. H., Khalid, M. & Lim, K. L., 1 Jun 2018, In : Journal of Materials Engineering and Performance. 27, 6, p. 2805-2814 10 p.

Research output: Contribution to journalArticle

Low carbon steel
Laser ablation
Fiber lasers
Laser pulses
Corrosion
1 Citation (Scopus)

CsH2po4: Electrolyte for intermediate temperature fuel cells

Teo, H. C., Loh, K. S., Mohamad, A. B. & Kadhum, A. A. H., 2011, Advanced Materials Research. Vol. 239-242. p. 2492-2498 7 p. (Advanced Materials Research; vol. 239-242).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuel cells
Electrolytes
Dehydration
Decomposition
Cesium
17 Citations (Scopus)

Cycle stability improvement of La-Mg-Ni based alloys via composite method

Lim, K. L., Liu, Y., Zhang, Q. A., Lin, K. S. & Chan, S. L. I., 15 Mar 2016, In : Journal of Alloys and Compounds. 661, p. 274-281 8 p.

Research output: Contribution to journalArticle

Hydrogen storage
Composite materials
Ball milling
Chemical analysis
Costs
9 Citations (Scopus)

Cycle stability of La-Mg-Ni based hydrogen storage alloys in a gas-solid reaction

Lim, K. L., Liu, Y., Zhang, Q. A., Lin, K. S. & Chan, S. L. I., 17 Nov 2016, (Accepted/In press) In : International Journal of Hydrogen Energy.

Research output: Contribution to journalArticle

Hydrogen storage alloys
Hydrogen storage
cycles
Life cycle
Substitution reactions
1 Citation (Scopus)

Density-functional theory of O2physical adsorption on sp 3 and sp3 hybridized nitrogen-doped CNT surfaces for fuel cell electrode

Yin, W. W., Wan Daud, W. R., Mohamad, A. B., Kadhum, A. A. H., Loh, K. S. & Herianto, E., 2011, Advanced Materials Research. Vol. 233-235. p. 17-22 6 p. (Advanced Materials Research; vol. 233-235).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Density functional theory
Fuel cells
Nitrogen
Adsorption
Electrodes
2 Citations (Scopus)

Design models of polymer electrolyte membrane fuel cell system

Mulyazmi, Wan Daud, W. R. & Herianto, E., 2010, Key Engineering Materials. Vol. 447 448. p. 554-558 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Fuel cells
Water management
Systems analysis
Costs
1 Citation (Scopus)

Design of biomass value chains that are synergistic with the food–energy–water nexus: Strategies and opportunities

Tapia, J. F. D., Samsatli, S., Doliente, S. S., Martinez-Hernandez, E., Ghani, W. A. B. W. A. K., Lim, K. L., Shafri, H. Z. M. & Shaharum, N. S. N. B., 1 Jul 2019, In : Food and Bioproducts Processing. 116, p. 170-185 16 p.

Research output: Contribution to journalReview article

supply chain
Biomass
biomass
Uncertainty
uncertainty
4 Citations (Scopus)

Development of 2D multiphase non-isothermal mass transfer model for DMFC system

Ismail, A., Kamarudin, S. K., Wan Daud, W. R., Mastar @ Masdar, M. S. & Hasran, U. A., 1 Jun 2018, In : Energy. 152, p. 263-276 14 p.

Research output: Contribution to journalArticle

Direct methanol fuel cells (DMFC)
Mass transfer
Methanol
Oxygen
Anodes
17 Citations (Scopus)
Direct ethanol fuel cells (DEFC)
Conceptual design
fuel cells
ethyl alcohol
commercialization
Direct methanol fuel cells (DMFC)
fuel cells
methyl alcohol
optimization
Electric potential
1 Citation (Scopus)
Direct methanol fuel cells (DMFC)
fuel cells
methyl alcohol
optimization
Electric potential

Development of Sr0.6Ba0.4Ce0.9Pr0.1O3-δ Electrolyte for Proton-Conducting Solid Oxide Fuel Cell Application

Norman, N. W., Wan Yusoff, W. N. A., Jais, A. A., Somalu, M. R. & Muchtar, A., 2 Jul 2019, In : IOP Conference Series: Earth and Environmental Science. 268, 1, 012147.

Research output: Contribution to journalConference article

Open Access
fuel cell
electrolyte
oxide
X-ray diffraction
thermal decomposition

Digital Light Processing 3-Dimensional Printer to Manufacture Electrolyzer Bipolar Plate

Husaini, T., Kishida, R. & Affiqah Arzaee, N., 2 Jul 2019, In : IOP Conference Series: Earth and Environmental Science. 268, 1, 012039.

Research output: Contribution to journalConference article

Open Access
fuel cell
nickel
polymer
gold
membrane
3 Citations (Scopus)

Direct synthesis of nitrogen-containing carbon nanotubes on carbon paper for fuel cell electrode

Yin, W. W., Wan Daud, W. R., Mohamad, A. B., Kadhum, A. A. H., Herianto, E. & Loh, K. S., 2012, AIP Conference Proceedings. Vol. 1455. p. 181-186 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fuel cells
carbon nanotubes
nitrogen
electrodes
carbon
1 Citation (Scopus)

Doping of palladium in silica nanofibers via electrospinning and sol-gel synthesize as hydrogen storage material

Shahgaldi, S., Yaakob, Z., Khadem, D. J., Wan Daud, W. R. & Herianto, E., 2011, Key Engineering Materials. Vol. 471-472. p. 1040-1045 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrogen storage
Electrospinning
Palladium
Nanofibers
Silicon Dioxide
2 Citations (Scopus)
Carbon nanofibers
Glycerol
Palladium
Fuel cells
Durability
1 Citation (Scopus)

Effect of annealing temperature on photoelectrochemical properties of WO<inf>3</inf>/Fe<inf>2</inf>O<inf>3</inf> photoelectrodes

Ng, K. H., Mark-Lee, W. F., Effery Minggu, L. & Kassim, M., 2014, IET Seminar Digest. CP659 ed. Institution of Engineering and Technology, Vol. 2014.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Photocurrents
Electrodeposition
Light absorption
Monolayers
Lighting
Samarium
Nickel oxide
Ball milling
Cerium
Solid oxide fuel cells (SOFC)
1 Citation (Scopus)

Effect of calcinations on morphology of electrospun copper and copper oxide nanofibers

Khadem, D. J., Yaakob, Z., Shahgaldi, S., Wan Daud, W. R. & Herianto, E., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 1884-1889 6 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Copper oxides
Nanofibers
Calcination
Copper
Gravimetric analysis
2 Citations (Scopus)

Effect of carbon precursor and initial pH on cobalt-doped carbon xerogel for oxygen reduction

Zainul Abidin, A. F., Loh, K. S., Wong, W. Y., Mohamad, A. B. & Puspasari, I., 14 Jun 2018, In : International Journal of Hydrogen Energy. 43, 24, p. 11047-11055 9 p.

Research output: Contribution to journalArticle

Xerogels
xerogels
Cobalt
cobalt
Carbon
3 Citations (Scopus)

Effect of compaction pressure on the performance of a non-symmetrical NiO–SDC/SDC composite anode fabricated by conventional furnace

Seyednezhad, M., Rajabi, A., Muchtar, A., Somalu, M. R. & Ooshaksaraei, P., 1 Jun 2017, In : Journal of Asian Ceramic Societies. 5, 2, p. 77-81 5 p.

Research output: Contribution to journalArticle

Anodes
Furnaces
Compaction
Composite materials
Ball mills
2 Citations (Scopus)

Effect of deep eutectic solvent in proton conduction and thermal behaviour of chitosan-based membrane

Wong, C. Y., Wong, W. Y., Walvekar, R., Loh, K. S., Khalid, M. & Lim, K. L., 1 Nov 2018, In : Journal of Molecular Liquids. 269, p. 675-683 9 p.

Research output: Contribution to journalArticle

Chitosan
eutectics
Eutectics
Protons
Proton conductivity

Effect of graphite size on the mechanical and electrical properties of epoxy composites for conductive polymer composites

Suherman, H., Sulong, A. B., Shuhaimi, M. A., Husaini, T. & Sahari, J., 2014, 20th World Hydrogen Energy Conference, WHEC 2014. Committee of WHEC2014, Vol. 1. p. 500-506 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Graphite
Electric properties
Mechanical properties
Composite materials
Polymers
4 Citations (Scopus)

Effect of intermediate layer in photocurrent improvement of three-layer photoanodes using WO3 and Fe2O3

Hosseini, S., Eftekhari, E., Masoudi Soltani, S., Memar, A., Eghbali Babadi, F., Dastorian Jamnani, B., Ismail, M. H. S. & Effery Minggu, L., Dec 2013, In : Journal of Environmental Chemical Engineering. 1, 4, p. 1309-1314 6 p.

Research output: Contribution to journalArticle

Photocurrents
irradiation
scanning electron microscopy
Ultraviolet radiation
Irradiation
Polyhydroxyethyl Methacrylate
PHEMA
imides
Lithium
Electrolytes
3 Citations (Scopus)

Effect of manganese oxide on the sinterability of 8 mol% yttria-stabilized zirconia

Chong, F. D., Tan, C. Y., Singh, R., Muchtar, A., Somalu, M. R., Ng, C. K., Yap, B. K., Teh, Y. C. & Tan, Y. M., 1 Oct 2016, In : Materials Characterization. 120, p. 331-336 6 p.

Research output: Contribution to journalArticle

Manganese oxide
manganese oxides
Yttria stabilized zirconia
Manganese
yttria-stabilized zirconia
2 Citations (Scopus)
Chitosan
Electrolyte
Fillers
Ionic conductivity
Polymers
2 Citations (Scopus)

Effect of nickel composition and preparation method for production of hydrogen via glycerol steam reforming

Hakim, L., Yaakob, Z., Ismail, M., Wan Daud, W. R. & Herianto, E., 2011, Key Engineering Materials. Vol. 471-472. p. 1046-1051 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steam reforming
Nickel
Glycerol
Hydrogen
Durapatite
2 Citations (Scopus)

Effect of nitrogen-doping concentration in carbon nanotubes on cathodic performance for proton exchange membrane fuel cell

Wong, W. Y., Wan Daud, W. R., Mohamad, A. B., Kadhum, A. A. H., Loh, K. S. & Herianto, E., 2012, CHUSER 2012 - 2012 IEEE Colloquium on Humanities, Science and Engineering Research. p. 796-800 5 p. 6504422

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cells
Oxygen
Membrane
Carbon
Nitrogen
28 Citations (Scopus)

Effect of nitrogen precursors on the electrochemical performance of nitrogen-doped reduced graphene oxide towards oxygen reduction reaction

Soo, L. T., Loh, K. S., Mohamad, A. B., Wan Daud, W. R. & Wong, W. Y., 25 Aug 2016, In : Journal of Alloys and Compounds. 677, p. 112-120 9 p.

Research output: Contribution to journalArticle

Graphite
Oxides
Graphene
Nitrogen
Oxygen
1 Citation (Scopus)

Effect of particle size and temperature on gasification performance of coconut and palm kernel shells in downdraft fixed-bed reactor

Yahaya, A. Z., Somalu, M. R., Muchtar, A., Sulaiman, S. A. & Wan Daud, W. R., 15 May 2019, In : Energy. 175, p. 931-940 10 p.

Research output: Contribution to journalArticle

Gasification
Particle size
Gases
Temperature
Chemical analysis

Effect of pervaporation plate thickness on the rate of methanol evaporation In a passive vapor-feed direct methanol fuel cell

Fauzi, N. F. I., Hasran, U. A. & Kamarudin, S. K., 21 Sep 2015, IOP Conference Series: Materials Science and Engineering. 1 ed. Institute of Physics Publishing, Vol. 88. 012055

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pervaporation
Direct methanol fuel cells (DMFC)
Methanol
Evaporation
Vapors

Effect of polydimethylsilicone membrane thickness on the rate of methanol evaporation in a passive vapor-feed direct methanol fuel cell

Fauzi, N. F. I., Hasran, U. A. & Kamarudin, S. K., 2014, 20th World Hydrogen Energy Conference, WHEC 2014. Committee of WHEC2014, Vol. 1. p. 168-174 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Direct methanol fuel cells (DMFC)
Evaporation
Methanol
Vapors
Membranes
7 Citations (Scopus)

Effect of PTFE content and sintering temperature on the properties of a fuel cell electrode backing layer

Rohendi, D., Herianto, E., Mohamad, A. B., Wan Daud, W. R., Kadhum, A. A. H. & Loh, K. S., 2014, In : Journal of Fuel Cell Science and Technology. 11, 4, 041003.

Research output: Contribution to journalArticle

Polytetrafluoroethylene
Polytetrafluoroethylenes
Fuel cells
Sintering
Hydrophobicity
3 Citations (Scopus)

Effect of silica on the thermal behaviour and ionic conductivity of mixed salt solid acid composites

Mohammad, N., Mohamad, A. B., Kadhum, A. A. H. & Loh, K. S., 5 Jan 2017, In : Journal of Alloys and Compounds. 690, p. 896-902 7 p.

Research output: Contribution to journalArticle

Ionic conductivity
Silicon Dioxide
Salts
Silica
Dehydration
17 Citations (Scopus)
Samarium
Carbonates
Cerium compounds
Solid oxide fuel cells (SOFC)
Surface morphology
12 Citations (Scopus)

Effect of sintering temperature on the microstructure and ionic conductivity of Ce0.8Sm0.1Ba0.1O2-δ electrolyte

Anwar, M., Muhammed Ali, S. A., Abdalla, A. M., Somalu, M. R. & Muchtar, A., 2017, In : Processing and Application of Ceramics. 11, 1, p. 67-74 8 p.

Research output: Contribution to journalArticle

Ionic conductivity
Electrolytes
Sintering
Microstructure
Powders