Research Output 1986 2020

Filter
Conference contribution
2011
1 Citation (Scopus)

Integrated project: An innovative way to reduce students' burden and enhance soft skills and integration elements

Sheikh Abdullah, S. R., Takriff, M. S., Mohammad, A. B., Tan Kofli, N., Ismail, M. & Markom, M., 2011, International Conference on Engineering Education and International Conference on Education and Educational Technologies - Proceedings. p. 202-208 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

student
semester
engineering
project group
education

Investigation of phase transformation and structure evolution of electrospun copper oxide nanofibers during thermal annealing

Khadem, D. J., Yaakob, Z., Shahgaldi, S., Wan Daud, W. R. & Herianto, E., 2011, Key Engineering Materials. Vol. 471-472. p. 792-797 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Copper oxides
Phase structure
Nanofibers
Phase transitions
Annealing
2 Citations (Scopus)

Investigation of the effect of electrospun polyethersulfone nanofibers in membrane

Shahgaldi, S., Yaakob, Z., Ghasemi, M., Wan Daud, W. R. & Khadem, D. J., 2011, Defect and Diffusion Forum. Vol. 312-315. p. 607-612 6 p. (Defect and Diffusion Forum; vol. 312-315).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanofibers
Sulfones
sulfones
Ether
membranes
1 Citation (Scopus)

Microstructure characterisation of Ag2O3-Bi 2O3 composite cathodes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)

Dedikarni, Muchtar, A., Muhamad, N. & Wan Daud, W. R., 2011, Key Engineering Materials. Vol. 471-472. p. 97-102 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Cathodes
Microstructure
Composite materials
Temperature
2 Citations (Scopus)

New silica supported HClO4 as efficient catalysts for estolide synthesis from oleic acid

Nordin, N. A. M., Adnan, N. F., Alias, A., Wan Nor Roslam, W. I., Salimon, J., Yarmo, M. A. & Kamaruddin, R. A., 2011, Advanced Materials Research. Vol. 173. p. 140-145 6 p. (Advanced Materials Research; vol. 173).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Oleic acid
Silica
Catalysts
Acids
Condensation reactions

Operating temperature effects on water transport behavior in a single cell PEMFC

Erni, M., Nik Suhaimi, M. H., Wan Daud, W. R., Herianto, E. & Miftah, K., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 1153-1158 6 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Thermal effects
Drag coefficient
Water
Membranes

Over-potentials analysis in solid acid fuel cell using CsH 2PO4 as anhydrous membrane

Mohamad, A. B., Kadhum, A. A. H., Musa, A. Y., Hosseini, S. & Wan Daud, W. R., 2011, Advanced Materials Research. Vol. 233-235. p. 2299-2304 6 p. (Advanced Materials Research; vol. 233-235).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fuel cells
Current density
Membranes
Acids
Electrolytes

Parameter optimization in the extraction of sea cucumber (Holothuria Scabra J) as a source of testosterone

Dewi, K. H., Markom, M. & Wan Daud, W. R., 2011, Advanced Materials Research. Vol. 233-235. p. 1358-1365 8 p. (Advanced Materials Research; vol. 233-235).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chlorine compounds
Methanol
Acetone
Steroid hormones
Temperature

Phytochemical screening and alkaloid identification of Cabomba furcata

Markom, M., Dewi, K. H., Jalil, N., Jia, L. W., Sheikh Abdullah, S. R. & Idris, M., 2011, Advanced Materials Research. Vol. 233-235. p. 971-976 6 p. (Advanced Materials Research; vol. 233-235).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Alkaloids
Screening
Fractionation
Lakes
Nicotine

Polymerization of aniline on mild steel and its corrosion protection

Kadhum, A. A. H., Musa, A. Y., Mohamad, A. B., Takriff, M. S. & Long, L., 2011, Applied Mechanics and Materials. Vol. 66-68. p. 817-821 5 p. (Applied Mechanics and Materials; vol. 66-68).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion protection
Aniline
Polyaniline
Carbon steel
Polymerization
7 Citations (Scopus)

Porous NiO-SDC carbonates composite anode for LT-SOFC applications produced by pressureless sintering

Jarot, R., Muchtar, A., Wan Daud, W. R., Muhamad, N. & Herianto, E., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 488-493 6 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Carbonates
Anodes
Sintering
Powders
1 Citation (Scopus)

Potential of nanofiltration for brackish water desalination in Gaza Strip

Abuhabib, A. A., Mohammad, A. W. & Rahman, R. A., 2011, Advanced Materials Research. Vol. 233-235. p. 2356-2358 3 p. (Advanced Materials Research; vol. 233-235).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanofiltration
Desalination
Membranes
Nanofiltration membranes
Water
2 Citations (Scopus)

Preparation, characterization and performance of polyethersulfone(PES) - Polyaniline(PANI) blended membrane

Razali, N. F., Mohammad, A. W. & Sulaiman, A. F., 2011, Advanced Materials Research. Vol. 233-235. p. 3018-3022 5 p. (Advanced Materials Research; vol. 233-235).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyaniline
Membranes
Conducting polymers
Nanoparticles
Ammonium persulfate
1 Citation (Scopus)

Preparation and characterization of nafion-zirconia composite membrane for PEMFC

Mokhtaruddin, S. R., Mohamad, A. B., Loh, K. S., Kadhum, A. A. H. & Akhmad, M., 2011, Advanced Materials Research. Vol. 239-242. p. 263-268 6 p. (Advanced Materials Research; vol. 239-242).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite membranes
Proton exchange membrane fuel cells (PEMFC)
Zirconia
Membranes
Electrolytes
4 Citations (Scopus)

Preparation and characterization of nano gold supported over montmorillonite clays

Suraja, P. V., Binitha, N. N., Yaakob, Z. & Silija, P. P., 2011, IOP Conference Series: Materials Science and Engineering. 1 ed. Vol. 17. 012019

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bentonite
Clay minerals
Gold
Clay
Silicon Dioxide
2 Citations (Scopus)

Review of parameters affecting performance of (Pt/C) electrode for proton exchange membrane fuel cells (PEMFCs)

Chebbi, R., Wan Daud, W. R., Mohamad, A. B. & Kadhum, A. A. H., 2011, Advanced Materials Research. Vol. 233-235. p. 43-49 7 p. (Advanced Materials Research; vol. 233-235).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Electrodes
Catalysts
Costs
Degradation
3 Citations (Scopus)

Samarium ion exchanged montmorillonite for high temperature cumene cracking reaction

Binitha, N. N., Silija, P. P., Suraj, V., Yaakob, Z. & Sugunan, S., 2011, IOP Conference Series: Materials Science and Engineering. 1 ed. Vol. 17. 012018

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Bentonite
Clay minerals
Ions
Acidity
2 Citations (Scopus)

Solar photocatalytic degradation of 2,4-dichlorophenol by TiO2 nanoparticle prepared by sol-gel method

Takriff, M. S., Ba-Abbad, M. M., Kadhum, A. A. H., Mohamad, A. B. & Sopian, K., 2011, Advanced Materials Research. Vol. 233-235. p. 3032-3035 4 p. (Advanced Materials Research; vol. 233-235).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sol-gel process
Nanoparticles
Degradation
Catalysts
Solar radiation
2 Citations (Scopus)

SPEEK/PES composite membranes as an alternative for proton exchange membrane in microbial fuel cell (MFC)

Wan Daud, W. R., Ghasemi, M., Chong, P. S., Md Jahim, J., Lim, S. S. & Ismail, M., 2011, 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011. p. 400-403 4 p. 6041505

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microbial fuel cells
Polyether ether ketones
Composite membranes
Ethers
Ion exchange

Stress analysis of proton exchange membrane fuel cell

Miftah, K., Wan Daud, W. R. & Herianto, E., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 875-880 6 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Stress analysis
Fuel cells
Finite element method
Diffusion in gases
5 Citations (Scopus)

Students' feedback in the continuous quality improvement cycle of engineering education

Takriff, M. S., Sheikh Abdullah, S. R., Mohammad, A. B. & Anuar, N., 2011, 2011 IEEE Global Engineering Education Conference, EDUCON 2011. p. 374-377 4 p. 5773163

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering education
Students
engineering
Feedback
education
2 Citations (Scopus)

Synthesis and characterization of PES/TiO2 nanofibers membrane

Khadem, D. J., Yaakob, Z., Shahgaldi, S., Ghasemi, M. & Wan Daud, W. R., 2011, Defect and Diffusion Forum. Vol. 312-315. p. 613-619 7 p. (Defect and Diffusion Forum; vol. 312-315).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanofibers
membranes
Membranes
synthesis
Nanoparticles
2 Citations (Scopus)

Synthesize and evaluation of electrospun perovskite (Ba 0.5Sr 0.5Co 0.2Fe 0.8O 3-δ) nanofibers for intermediate temperature solid-oxide fuel cell

Shahgaldi, S., Yaakob, Z., Khadem, D. J. & Wan Daud, W. R., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 1544-1550 7 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanofibers
Solid oxide fuel cells (SOFC)
Perovskite
Temperature
Fibers
3 Citations (Scopus)

The effectiveness of industrial training on UKM engineering students

Mat, K., Omar, M. Z., Osman, S. A., Tan Kofli, N., Ab Rahman, M. N., Jamil, M. & Jamaluddin, N., 2011, Procedia - Social and Behavioral Sciences. Vol. 18. p. 656-665 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Malaysia
engineering
Students
student
career
7 Citations (Scopus)

The Open Ended Laboratory for measurement of communication skill for chemical/biochemical engineering students

Tan Kofli, N. & Abd Rahman, N., 2011, Procedia - Social and Behavioral Sciences. Vol. 18. p. 65-70 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical Engineering
communication skills
Communication
engineering
Students
2010
2 Citations (Scopus)

Competencies achieved through industrial training programme

Jamil, M., Omar, M. Z., Osman, S. A., Tan Kofli, N., Ab Rahman, M. N. & Mat, K., 2010, International Conference on Engineering Education and International Conference on Education and Educational Technologies - Proceedings. p. 404-408 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

trainee
training program
employer
performance
ability
2 Citations (Scopus)

Design models of polymer electrolyte membrane fuel cell system

Mulyazmi, Wan Daud, W. R. & Herianto, E., 2010, Key Engineering Materials. Vol. 447 448. p. 554-558 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Fuel cells
Water management
Systems analysis
Costs
12 Citations (Scopus)

Fabrication of dense composite ceramic electrolyte SDC-(Li/Na) 2CO3

Raharjo, J., Muchtar, A., Wan Daud, W. R., Muhamad, N. & Herianto, E., 2010, Key Engineering Materials. Vol. 447 448. p. 666-670 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbonates
Electrolytes
Samarium
Cerium
Fabrication
4 Citations (Scopus)

Inhibition of aluminum alloy 2024 corrosion by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol in highly sulfuric acid solution

Musa, A. Y., Mohamad, A. B., Kadhum, A. A. H., Takriff, M. S., Daud, A. R. & Kamarudin, S. K., 2010, Advanced Materials Research. Vol. 93-94. p. 354-357 4 p. (Advanced Materials Research; vol. 93-94).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sulfuric acid
Aluminum alloys
Corrosion
Polarization
Potentiodynamic polarization

Inhibition of mild steel corrosion under hydrodynamic conditions

Musa, A. Y., Kadhum, A. A. H., Mohamad, A. B., Takriff, M. S., Daud, A. R. & Kamarudin, S. K., 2010, AIP Conference Proceedings. Vol. 1250. p. 329-332 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

corrosion
hydrodynamics
steels
submerging
rotating cylinders
4 Citations (Scopus)

Integration of Inherent Safety assessment into process simulation

Takriff, M. S. & Bahnuddin, N. N., 2010, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 19. p. 397-402 6 p. (Chemical Engineering Transactions; vol. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acetaldehyde
Process design
Simulators
5 Citations (Scopus)

Nickel-hydroxyapatite as biomaterial catalysts for hydrogen production via glycerol steam reforming

Hakim, L., Yaakob, Z., Ismail, M. & Daud, W. R. W., 2010, Key Engineering Materials. Vol. 447 448. p. 770-774 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steam reforming
Biocompatible Materials
Durapatite
Hydrogen production
Nickel
6 Citations (Scopus)

Review on serpentine flow field design for PEM fuel cell system

Misran, E., Wan Daud, W. R. & Herianto, E., 2010, Key Engineering Materials. Vol. 447 448. p. 559-563 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Flow fields
8 Citations (Scopus)

Sintering effects on LSCF cathodes for intermediate temperature solid oxide fuel cells (IT-SOFCs)

Muchtar, A., Hamid, N. A., Muhamad, N. & Wan Daud, W. R., 2010, Advanced Materials Research. Vol. 139-141. p. 141-144 4 p. (Advanced Materials Research; vol. 139-141).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Cathodes
Sintering
Temperature
Density (specific gravity)
3 Citations (Scopus)

Study effect of stress in the electrical contact resistance of bipolar plate and membrane electrode assembly in proton exchange membrane fuel cell: A review

Kurniawan, M., Wan Daud, W. R. & Herianto, E., 2010, Key Engineering Materials. Vol. 447 448. p. 775-779 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proton exchange membrane fuel cells (PEMFC)
Contact resistance
Membranes
Electrodes
Stress analysis
1 Citation (Scopus)

Synergistic effect of cobalt on nitrogen and carbon codoped anatase titania for photodegradation under visible light

Binitha, N. N., Yaakob, Z., Silija, P. P., Resmi, M. R. & Suraja, P. V., 2010, Nanotechnology 2010: Advanced Materials, CNTs, Particles, Films and Composites - Technical Proceedings of the 2010 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2010. Vol. 1. p. 464-468 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Photodegradation
Cobalt
anatase
Titanium dioxide
Nitrogen

Thin film of palladium on alumina ceramic membrane tube: Effect of combine sol-gel process with electroless plating on deposits morphology

Sari, R., Yaakob, Z., Ismail, M. & Wan Daud, W. R., 2010, Key Engineering Materials. Vol. 447 448. p. 700-704 5 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ceramic membranes
Aluminum Oxide
Electroless plating
Palladium
Sol-gel process
2009
4 Citations (Scopus)

Design and optimization of Direct Methanol Fuel Cell (DMFC)

Basri, S., Kamarudin, S. K. & Wan Daud, W. R., 2009, Chemical Engineering Transactions. Italian Association of Chemical Engineering - AIDIC, Vol. 18. p. 111-116 6 p. (Chemical Engineering Transactions; vol. 18).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Direct methanol fuel cells (DMFC)
Methanol
Catalysts
Anodes
Cathodes
6 Citations (Scopus)

Effective parameters on performance of microbial fuel cell

Rahimnejad, M., Mokhtarian, N., Najafpour, G. D., Ghoreyshi, A. A. & Wan Daud, W. R., 2009, 2nd International Conference on Environmental and Computer Science, ICECS 2009. p. 411-415 5 p. 5383480

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microbial fuel cells
Biological fuel cells
fuel cell
Yeast
substrate

Elemental characterization of PM10 in UKM campus

Kadhum, A. A. H., Batiha, M. A., Musa, A. Y. & Mohamd, A. B., 10 Dec 2009, 2009 International Conference on Space Science and Communication, IconSpace - Proceedings. p. 93-95 3 p. 5352661

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Malaysia
air
artificial intelligence
Air
Chemical analysis

High hydrogen yield by fermentation using Clostridium saccharoperbutylacetonicum N1-4

Alalayah, W. M., Kalil, M. S., Kadhum, A. A. H., Md Jahim, J. & Alauj, N. M., 2009, Proceedings of the ASME 3rd International Conference on Energy Sustainability 2009, ES2009. Vol. 1. p. 225-229 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clostridium
Fermentation
Glucose
Hydrogen
Hydrogen production

Preparation and thermal analysis of polyurethane composite using oil palm based polyol and fiber

Min Min, A., Yaakob, Z., Mohd Hilmi, M., Khairul Zaman, H. & Kamarudin, S. K., 2009, Society of Plastics Engineers - Global Plastics Environmental Conference, GPEC 2008. Vol. 2. p. 1134 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Palm oil
Polyurethanes
Polyols
Thermoanalysis
Fibers
2008
1 Citation (Scopus)

Bacteria identification using artificial neural network: A case study of Peptococcaceae family identification

Ahmad, N., Sheikh Abdullah, S. R., Anuar, N. & Husin, H., 2008, 2008 International Conference on Electronic Design, ICED 2008. 4786682

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bacteria
Neural networks
Backpropagation algorithms
Microorganisms
MATLAB

Photoelectrochemical performance of TiO 2-WO 3-Fe 2O 3 photoelectrode for water splitting

Effery Minggu, L., Wan Daud, W. R. & Kassim, M., 2008, 17th World Hydrogen Energy Conference 2008, WHEC 2008. Vol. 2. p. 890-893 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

water
1 Citation (Scopus)

Photostability study of tris(Dithiolene) tungstate, dye sensitizers for a photocatalytic H 2O spliting reaction

Kassim, M., Khuzaimah, A., Effery Minggu, L., Pui, L. K. & Wan Daud, W. R., 2008, 17th World Hydrogen Energy Conference 2008, WHEC 2008. Vol. 2. p. 903-907 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

photostability
dyes
dye

Reduction of warpage occurrence on stack-die QFN using FEA and statistical method

Abdullah, I., Ahmad, I., Meor Talib, M. Z. & Kamarudin, M. N. B. C., 2008, Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium. 5507788

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermal expansion
Statistical methods
Finite element method
Thermodynamic properties
Sheet molding compounds
2007
5 Citations (Scopus)

Evaluation of different die attach film and epoxy pastes for stacked die QFN package

Ahmad, I., Bachok, N. N., Chiang, N. C., Meor Talib, M. Z., Rosle, M. F., Latip, F. L. A. & Aziz, Z. A., 2007, Proceedings of the Electronic Packaging Technology Conference, EPTC. p. 869-873 5 p. 4469691

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adhesion
Lead
Semiconductor materials
Silicon
Industry
2 Citations (Scopus)

Warpage and wire sweep analysis of QFN molded strip using experimental and modeling methods

Abdullah, I., Chiang, N. C., Mokhtar, U., Said, A., Meor Talib, M. Z. & Ahmad, I., 2007, Proceedings of the Electronic Packaging Technology Conference, EPTC. p. 494-498 5 p. 4469692

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lead
Wire
Metals
Molding
Design of experiments
2005
1 Citation (Scopus)

Recognizing vehicle lubricant oil quality via neural network

Sheikh Abdullah, S. N. H., Omar, K., Sheikh Abdullah, S. R., Harun, N., Lubis, M. S. A., Che Haron, C. H., Ahmad, K., Ahmad Nazri, M. Z., Nasrudin, M. F., Lee, C. S., Fakhrudin, A. S. & Baruji, M. E., 2005, Proceedings - 8th International Symposium on Signal Processing and its Applications, ISSPA 2005. Vol. 2. p. 579-582 4 p. 1581004

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lubricants
Viscosity
Neural networks
Backpropagation algorithms
Shear stress
2003

The characteristic of Proportional Band (PB) on a level process control loop

Abd Rahman, N. & Manap, I. R. A., 2003, 2003 Asian Conference on Sensors, AsiaSENSE 2003. Institute of Electrical and Electronics Engineers Inc., p. 289-291 3 p. 1225035

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Process control
Controllers
Display devices
Level control
Water levels